Canon PIXMA iP8750 User Manual

Page 300

3. Drag the Intensity slide bar to set the intensity.

Check6

Is printing performed beyond the recommended printing area?

If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper
may become stained with ink.

Resize your original document in your application software.

Check7

Is the paper feed roller dirty?

Clean the paper feed roller.

Note

• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.

Check8

Is the inside of the printer dirty?

When performing duplex printing, the inside of the printer may become stained with ink, causing the printout to
become smudged.

Perform the Bottom Plate Cleaning to clean the inside of the printer.

Note

• To prevent the inside of the printer from stains, set the paper size correctly.

Check9

Set the time to dry the printed surface longer.

Doing so gives the printed surface enough time to dry so that paper smudged and scratched are prevented.

1. Make sure that the printer is turned on.

2. Open the Canon IJ Printer Utility.

3. Select Custom Settings in the pop-up menu.

4. Drag the Ink Drying Wait Time: slide bar to set the wait time, and then click Apply.

5. Confirm the message and click OK.

300