Checking the network setting information – Canon PIXMA iP8750 User Manual

Page 280

2. Start Network Utility.

3. Click the Ping button.

4. Make sure that Send only XX pings (XX are numbers) is selected.

5. Enter the IP address of the target printer or the target access point in Enter the network

address to ping..

6. Click Ping.

"XXX.XXX.XXX.XXX" is the IP address of the target device.

A message such as the following is displayed.

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=0 ttl=64 time=3.394 ms

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=1 ttl=64 time=1.786 ms

64 bytes from XXX.XXX.XXX.XXX: icmp_seq=2 ttl=64 time=1.739 ms

--- XXX.XXX.XXX.XXX ping statistics ---

3 packets transmitted, 3 packets received, 0% packet loss

If the packet loss is 100%, the communication is not available. Otherwise, the computer is
communicating with the target device.

Checking the Network Setting Information

To check the IP address or the MAC address of the printer, print out the network setting information.

280