Cannot print on the disc label, Disc label printing does not start, Disc tray does not feed properly – Canon PIXMA iP8750 User Manual

Page 289: Disc tray jammed

Cannot Print on the Disc Label

Disc Label Printing Does Not Start

Disc Label Printing Does Not Start

Check1

Is the disc tray placed properly?

Open the disc tray guide, properly place the disc tray again, then press the RESUME/CANCEL button on the
printer.

Use the disc tray supplied with this printer ("L" is on the upper side).

For details on how to place the disc tray, refer to

Check2

Is the printable disc placed on the disc tray?

Place the printable disc on the disc tray properly, then press the RESUME/CANCEL button.

Use the disc tray supplied with this printer ("L" is on the upper side).

For details on how to place the disc tray, refer to

Check3

If disc label printing stops before it is complete, try the operation again.

If a certain period of time has elapsed while disc label printing is in progress, the printer stops initializing.

The printer resumes initializing by pressing the RESUME/CANCEL button.

Try the operation again following the on-screen instructions.

Disc Tray Does Not Feed Properly

Check1

Is the disc tray placed properly?

Properly place the disc tray again, then press the RESUME/CANCEL button.

Use the disc tray supplied with this printer ("L" is on the upper side).

For details on how to place the disc tray, refer to

Check2

Unrecognizable printable disc may be placed.

Canon recommends that you use printable discs specially processed to be printed on by an inkjet printer.

Disc Tray Jammed

Pull out the disc tray gently.

If the disc tray cannot be pulled out, turn the printer off, then turn the printer back on again. The disc tray
will automatically be ejected.

When the disc tray is pulled out, place the disc tray ("L" is on the upper side) again, then retry printing.
Place the printable disc properly referring to

If the disc tray is still jammed, check if there is a problem with the printable disc.

289