Canon VB-H41 - Manual (Page 64)

64
Video Record Setting
(1) [Video Record Action]
Select the destination of a video recorded when an
event occurs. To record to a server selected on the
[Upload] in the setting page, select [Upload] and to
record to an SD card inserted in the camera, select
[Record to SD Card].
Note
The size and format of video recorded according to the [Video
Record Action] settings are as follows:
Settings must be made in the above setting page to make
an actual video recording.
Volume Detection
(1) [Volume Detection Event]
Set volume detection to [Disable] or [Enable].
(2) [Detection Criteria]
Set the criteria for generating volume detection events
to [The reference volume level or above] or [The
reference volume level or below].
(3) [Reference Volume Level]
Set the reference volume level for detection in the
range of 0 to 100.
Perform an actual test at the volume level before
setting the value.
(4) [Detect Criteria Duration (sec)]
Set the duration of the detect criteria in the range of 0
to 10 (sec.). When the status meeting the detect
criteria has continued for the duration or longer, an
ON event is generated.
(5) [ON Event Operation]
Select the operation to be performed upon an ON
event. If [Enable] is selected, (8) [Preset], (9) [Video
Record] and (10) [E-mail Notification] will be executed
according to their settings upon an ON event.
(6) [OFF Event Operation]
Select the operation to be performed upon an OFF
event. If [Enable] is selected, (8) [Preset], (9) [Video
Record] and (10) [E-mail Notification] will be executed
according to their settings upon an OFF event.
(7) [Ongoing ON Event Operation]
Select the operation to be performed while a volume
detection event is ongoing.
Select [Enable] to perform operations according to
the (9) [Video Record] and (10) [E-mail Notification]
settings during an ongoing volume detection event.
(8) [Preset]
If a preset is specified, the camera will orient
automatically to the specified preset position when a
volume detection event occurs. To use presets, it is
necessary to set the presets with the Preset Setting
[Event]
Setting Video Record, Volume Detection, Audio Playback and Timer
The following can be set here.
• Video Record Setting
Set where video is recorded when an event
occurs.
• Volume Detection
Set the operation to be performed at the time of
volume detection.
• External Device Output
Set external device output.
• External Device Input
Set the operation to be performed when an event
is triggered by input from an external device.
• Timer
Set timer events.
• Sound Clip Upload
Set the audio file registered as playback.
[Video Record
Action] settings
Applied video format Applied video size
[Upload] [Upload] > [Video
Format] settings
When the video format is
[JPEG], [Video] > [JPEG] >
[Video Size: Upload / SD
card]
When the video format is
[H.264], [Video] > [H.264] >
[Video Size]
[Record to SD
Card]
[Memory Card] >
[Video Format]
settings