Canon VB-H41 - Manual (Page 144)

144
Recording to an SD Memory Card
Manually
Video displayed in the Admin Viewer can be manually
recorded to an SD memory card.
Note
• To record on an SD memory card, an SD memory card must be
inserted in the camera (p. 129) and [Save Logs and Videos]
must be selected in the setting page > [Memory Card] >
[Operation Settings].
• The format and size of the video recorded on an SD memory
card depends on the settings made on the Setting page.
Video format: [Memory Card] > [Video Format]
Video size: JPEG [Video] > [JPEG] > [Video Size: Upload /
SD card]
H.264 [Video] > [H.264] > [Video Size]
„ Recording Videos Manually
The [Start/Stop SD Card Recording] button
appearance changes as shown below depending on
recording status.
„ Confirming Manually Recorded Video
Use the Recorded Video Utility (p. 118) to confirm video
manually recorded to an SD memory card.
Click the [Recorded Video Utility] button to start the
Recorded Video Utility from the Admin Viewer.
1 If you have not yet obtained the camera control
privileges, click the [Obtain/Release Camera Control]
button and obtain the control privileges.
2 Click the [Start/Stop SD Card Recording] button.
Not recording
Recording
3 To stop video recording, click the [Start/Stop SD Card
Recording] button again.
Important
Recording to the SD memory card will be terminated when the
length of manually recorded video exceeds 300 seconds from
the time recording started.