Canon VB-H41 - Manual (Page 155)

List of Log Messages
155
8
Appen
di
x
B201 Event notification failure [info]
B202 Event reception failure [info]
B203 Audio message send error [info]
B204 Audio message reception failure [info]
B301 Audio device error [err]
B401 Audio device initialization failed [err]
B402 Audio server initialization failed [err]
B403 Settings change failed [err]
„ Application (Video-Related) Messages
V001 Starting and shutdown of video server [info]
V020 Starting intelligent service [info]
V020 Shutting down intelligence service [info]
V200 Video input warning [warning]
Description cannot notify %1 event [%2] (B201)
%1 Event type (ald)
%2 Error number
Meaning The event notification failed.
Description cannot recv event [%1] (B202)
%1 Error number
Meaning The event could not be received.
Description audio message send error %1 [%2] (B203)
%1 Message type
%2 Error number
Meaning The audio message could not be sent.
Description audio message recv error [%1:%2] (B204)
%1 Error notification number
%2 Cause of error
Meaning The audio message could not be received.
Description cannot use audio device for %1 [%2:%3]
(B301)
%1 Transmission/reception type (rx | tx)
%2 Error handling (open | write | flush)
%3 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically,
arrange for servicing.
Description audio device initialization error [%1] (B401)
%1 Error number
Meaning The audio device could not be initialized.
The audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description audio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized.
The audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The
audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 video (V001)
%1 Starting or stopping
Meaning The video server was started/stopped.
Description starting intelligent. (V020)
Meaning Intelligent service was started.
Description shutdown intelligent. (V020)
Meaning Intelligent service was shut down.
Description video %1 warning - %2 (V200)
%1 Video number
%2 Error number
Meaning An error that permits recovery of the video
input system was detected.
Countermeasure Change image size or Q value, or decrease
data size for each JPEG image.