Brother MFC-440CN - Manual (Page 84)

72
10
You can only use one advanced fax
operation at a time:
„ Fax Forwarding
„ Fax Storage
„ Fax Preview (MFC-660CN and
MFC-845CW only)
„ PC Fax Receive
„ Off
You can change your selection at any time. If
received faxes are still in the machine’s
memory when you change the advanced fax
operations, a question will appear on the
LCD. (See Changing Advanced Fax
Operations on page 77.)
Fax Forwarding
10
When you choose Fax Forward, your
machine stores the received fax in the
memory. The machine will then dial the fax
number you have programmed and forward
the fax message.
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose
Advanced Fax Operation
.
Press OK.
d
Press a or b to choose
Forward/Store
.
Press OK.
e
Press a or b to choose Fax Forward.
Press OK.
f
Enter the forwarding number (up to 20
digits).
Press OK.
g
Press a or b to choose
Backup Print:On
or
Backup Print:Off
.
Press OK.
Note
• If you choose Backup Print:On, the
machine will also print the fax at your
machine, so you will have a copy. This is
the safety feature in case there is a power
failure before the fax is forwarded or a
problem at the receiving machine.
• (MFC-660CN and MFC-845CW only)
The machine can store faxes up to 24
hours if there is a power failure.
• When Fax Forwarding is turned on, your
machine will only receive monochrome
faxes into memory. Colour faxes will not
be received, unless the sending machine
converts them to monochrome before
sending.
h
Press Stop/Exit.
Advanced fax operations
(Monochrome only)
10