Brother MFC-440CN - Manual (Page 157)

Troubleshooting and Routine Maintenance
145
c
Install the yellow protective part, lift each
lock release lever and push it until it
clicks and then close the ink cartridge
cover.
CAUTION
If you are not able to find the yellow
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either the
yellow protective part or the ink cartridges
in position. Shipping without them will
cause damage to your machine and may
void your warranty.
d
Unplug the machine from the telephone
wall socket and take the telephone line
cord out of the machine.
e
Unplug the power cord from the
electrical socket and from the machine.
f
Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
g
Lift the scanner cover (1) to release the
lock. Gently push the scanner cover
support down (2) and close the scanner
cover (3).
h
If your machine has a handset, remove
it and the handset curled cord.
i
(MFC-845CW) Rotate the machine’s
antenna to the down position.