Listening to your ogm, Erasing your ogm, Fax/tel ogm – Brother MFC-440CN User Manual
Page 80: Activating tad mode, Fax/tel ogm activating tad mode

Chapter 9
68
Listening to your OGM
9
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose Setup TAD.
Press OK.
d
Press a or b to choose OGM.
Press OK.
e
Press a or b to choose TAD Message
or F/T Message.
Press OK.
f
Press a or b to choose Playing OGM.
Press OK.
Adjust the volume by pressing Volume
d
or c
.
g
Press Stop/Exit.
Erasing your OGM
9
a
Press Menu.
b
Press a or b to choose Fax.
Press OK.
c
Press a or b to choose Setup TAD.
Press OK.
d
Press a or b to choose OGM.
Press OK.
e
Press a or b to choose TAD Message
or F/T Message.
Press OK.
f
Press a or b to choose Erase MSG.
Press OK.
g
Choose one of the following:
Press 1 to erase the OGM.
Press 2 to exit without erasing.
h
Press Stop/Exit.
Fax/Tel OGM
9
If your machine is set to Fax/Tel receive
mode, this message will be played by your
Brother machine to a caller. Unlike the TAD
OGM, the caller will not be able to leave a
message. The purpose of the fax/tel OGM is
to let the caller know that their call will be
answered shortly.
To record your Fax/Tel OGM, follow the
instructions on Outgoing message (OGM)
on page 67.
If you need to review the steps for setting up
the Fax/Tel receive mode, see Receive
modes on page 44.
Activating TAD mode
9
When the
light glows, TAD mode is
active. Press
to enter TAD mode.