Brother MFC-440CN User Manual

Page 149

Troubleshooting and Routine Maintenance

137

Open the new ink cartridge bag for the
colour shown on the LCD, and then take
out the ink cartridge.

Remove the protective yellow cap (1).

Improper Setup

DO NOT touch the area shown in the
illustration below.

Note

If the protective yellow caps come off
when you open the bag, the cartridge will
not be damaged.

Each colour has its own correct position.
Insert the ink cartridge in the direction of
the arrow on the label.

Lift the lock release lever and push it
until it clicks, and then close the ink
cartridge cover.

If you replaced an ink cartridge, the LCD
may ask you to verify that it was a brand
new one. (For example,
Did You Change Black

) For each

new cartridge you installed, press
1 (Yes) to automatically reset the ink dot
counter for that colour. If the ink
cartridge you installed is not a brand
new one, be sure to press 2 (No).
If you wait until the LCD shows Near
Empty

and Ink Empty, the machine

will automatically reset the ink dot
counter.

brother

XXXX