Paper type, Changing default copy settings, Paper type -8 – Brother MFC-9700 User Manual
Page 95: Changing default copy settings -8

M A K I N G C O P I E S
11 - 8
Paper Type
You can use the following types of paper for copying. For the best print quality,
select the type of media that you are using.
THIN
(16lb - 18.4lb)
- For thin paper or transparency
PLAIN
(18.7lb - 25.3lb)
- For ordinary plain paper
THICK
(25.6lb - 32lb)
- For heavy weight paper or rough paper
THICKER
(32.3lb - 43lb)
- For heavier weight paper, rough paper or bond
paper.
TRANSPARENCY
- For transparency (OHP)
1
Press Options and
or
to select
OPT:PAPER TYPE
, and then press Set.
2
Press
or
to select your type of paper, and then press Set.
3
Press Copy—OR—Press
or
for additional settings.
Changing Default Copy Settings
Press Menu, 3 to change default settings for Copy mode. These settings will
remain until you change them again by pressing Menu. Adjust the Copy Mode
and Contrast settings.
By pressing a number, you can adjust copy settings as shown in the following
chart. Press
or
to scroll through the options for each setting. Press Set
to save your selection. Press Stop/Exit. —OR—Press
to select the next
setting you want to change.
Press Menu, and 3.
TEXT
1.COPY MODE
2.CONTRAST
- +
is default
AUTO
PHOTO
PLAIN
3.PAPER SIZE
THIN
THICK
THICKER