Setting the ring volume, Setting the beeper volume, Setting the speaker volume – Brother MFC-9700 User Manual
Page 52: Memory storage, Turning on automatic daylight savings time, Setting the ring volume 1

4 - 5
I N I T I A L S E T U P
Setting the Ring Volume
1
Press Menu, 1, 4, 1.
2
Press
or
to select
OFF
,
LOW
,
MED
, or
HIGH
, and then press Set.
3
Press Stop/Exit.
Setting the Beeper Volume
You can set the beeper to
LOW
,
HIGH
or
OFF
. The default setting is
LOW
.
When the beeper is set to
LOW
or
HIGH
, the MFC beeps every time you press
a key or make an error and when fax sending or receiving has finished.
1
Press Menu, 1, 4, 2.
2
Press
or
to select your option.
3
When the LCD shows the option you want, press Set.
4
Press Stop/Exit.
Setting the Speaker Volume
You can set the volume of the MFC’s one-way speaker.
1
Press Menu, 1, 4, 3.
2
Press
or
to select
OFF
,
LOW
,
MED
, or
HIGH
, and then press Set.
3
Press Stop/Exit.
Memory Storage
In the event of a power failure, all menu settings are stored permanently:
GENERAL
SETUP
,
SETUP RECEIVE
,
SET AUTO DIAL
,
REMOTE
FAX OPT
plus the
COVERPG SETUP
and
COVERPAGE MSG
(from
SETUP SEND
). You may have to reset the date and time.
Turning On Automatic Daylight Savings Time
You can set the MFC to change automatically for Daylight Savings Time.
It will reset itself forward one hour in the Spring and back one hour in the Fall.
1
Press Menu, 1, 6.
2
Press
or
to select
ON
(or
OFF
),
and then press Set.
3
Press Stop/Exit.
1.RING
2.BEEPER
3.SPEAKER
6.AUTO DAYLIGHT