Brother MFC-9700 - Manual (Page 82)

9 - 2 R E M O T E F A X O P T I O N S
4
If your pager requires a PIN, enter the PIN, and then press #, press
Redial/Pause, enter your fax number followed by # #, and then press Set.
For example, 1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
—OR—
If you do not need a PIN, press Redial/Pause, enter your fax number followed
by # #, and then press Set.
For example,
Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
5
Press Stop/Exit.
Setting Fax Storage
If you set Fax Storage to ON , you will be able to retrieve fax messages from
another location using Fax Forwarding, Paging or Remote Retrieval operations.
The LCD will indicate when you have a fax stored in memory. The LCD
prompts you to choose a fax setting.
1
Press Menu, 2, 5, 2.
2
Press or to select ON (or OFF ),
and then press Set.
3
Press Stop/Exit.
4
Press 1 to erase faxes from memory and
to turn off Fax Storage.
—OR—
Press 2 to exit without deleting faxes or
changing this setting.
(See
Printing a Fax in Memory , page 5-5.)
Backup Print
If you have set FAX STORAGE to ON , your MFC automatically prints faxes
as they are received into memory. This is a safety feature in case the power goes
out so you won’t lose your message.
You cannot change a Paging number or PIN remotely.
Press Redial/Pause for each 3.5 second delay, as needed.
If there are faxes in memory when you turn Fax Storage OFF , you must choose
to delete them or exit without turning Fax Storage on.
2.FAX STORAGE
ERASE ALL FAX?
1.YES 2.NO