Brother MFC-9700 - Manual (Page 87)

P R I N T I N G R E P O R T S 10 - 2
3
Enter the time to begin printing, in 24-hour format, and then press Set.
(For example: enter 19:45 for 7:45 PM.)
4
Press Stop/Exit.
Using the Reports Key
1
Press Reports.
2
Press or to select the report you want, and then press Set.
—OR—
Enter the number of the report you want to print. For example, press 1 to print
the Help List.
Five reports are available:
Prints the Help List so you can see at a glance
how to quickly program every menu selection.
Lists names and numbers stored in One Touch
and Speed Dial memory, in numerical order.
Lists information about the last 200 incoming
and outgoing faxes. TX means Transmit; RX
means Receive.
Prints a transmission Verification Report for
your last transmission.
Lists settings for GENERAL SETUP ,
SETUP RECEIVE , SETUP SEND ,
SETUP REPORTS , REMOTE FAX OPT
and MISCELLANEOUS .
Note
Don’t forget to set up the Fax Activity Report and Transmission Verification
Report as explained on page 10-1.
1.HELP LIST
2.AUTO DIAL
3.FAX ACTIVITY
4.TRANSMISSION
5.USER SETTINGS