Brother MFC-9700 - Manual (Page 212)

G - 2 G L O S S A R Y
Cover Page Prints a page at the other party’s MFC that contains the sender and recipient’s
name and fax number, number of pages and comment. You can generate an electronic cover
page at the other end with pre-programmed information from memory or you can print a
sample cover page to fax with your original.
Cover Page Message The comment that is on the Cover Page. This is a programmable
feature.
Delayed Fax Sends your fax at a later time that day.
Delayed Timer You can program a certain time each day that all delayed faxes will be sent on
a first come/first served basis.
Distinctive Ring A service purchased from your telephone company that provides another
phone number on an existing phone line. The Brother MFC uses the new number to simulate
a dedicated fax line.
Dual Access Your MFC can scan outgoing faxes or scheduled jobs into memory at the same
time it is sending a fax or receiving or printing an incoming fax.
Easy Receive Enables your MFC to respond to CNG tones if you interrupt a fax call by
answering it.
ECM (Error Correction Mode) Detects errors during fax transmission and automatically
resends the page(s) that had an error.
Electronic Cover Page A preprogrammed cover page that is transmitted from the MFC’s
memory, eliminating the need for making up cover pages manually.
extension phone A telephone on the fax number that is plugged into a separate wall jack.
external phone A TAD (telephone answering device) or telephone that is plugged into the
EXT jack of your MFC.
Fax Activity Report Lists information about the last 200 incoming and outgoing faxes. TX
means Transmit. RX means Receive.
Fax Forwarding Sends a fax received in memory to another preprogrammed fax number.
Fax Storage You can print stored faxes later, or retrieve them from another location using Fax
Forwarding, Paging, or Remote Retrieval commands.
fax tones The signals sent by sending and receiving fax machines while communicating
information.
Fine Mode Resolution is 203
×
196 dpi. It is used for small print and graphs.
gray scale The shades of gray available for copying and faxing photographs.
Group number A combination of One Touch and Speed Dial numbers that are stored on a One
Touch key for Broadcasting.
Help List By pressing the Reports key and 1, you can get a printout of the complete Menu so
you can use it to program your MFC when you do not have the Owner’s Manual with you.
interval The preprogrammed time period between automatically printed Fax Activity Reports.
You can print Activity Reports on demand without interrupting this cycle.
LCD (liquid crystal display) The display screen on the MFC that shows interactive messages
during On-Screen Programming and defaults to the date and time when the MFC is idle.
Menu mode Programming mode for changing the settings of your MFC.