Brother MFC J6510DW User Manual
Page 76
Troubleshooting
71
10
Is your Brother machine
assigned with an available
IP address?
(Continued)
wired/
wireless
1 (Windows
®
2000/XP, Windows Server
®
2003/2008)
Click the start button, All Programs (Programs for Windows
®
2000),
Accessories and Windows Explorer, and then My Computer.
(Windows Vista
®
/Windows
®
7)
Click the button and Computer.
2 Double-click Local Disk (C:), Program Files or Program Files (x86),
Browny02, Brother, BrotherNetTool.exe to run the program.
Note
If the User Account Control screen appears,
(Windows Vista
®
) Click Allow.
(Windows
®
7) Click Yes.
3 Follow the on screen instructions.
4 Check the diagnosis by printing the Network Configuration List.
Note
The Network Connection Repair Tool will start automatically if you check
the Enable Network Connection Repair Tool box using the Status
Monitor. Right-click on the Status Monitor screen, click Options, Details
and then click the Diagnostic tab. This is not recommended when your
network administrator has set the IP address to static, since it will
automatically change the IP address.
If the correct IP address and Subnet mask are still not assigned even after
using the Network Connection Repair Tool, ask the network administrator
for this information, or visit the Brother Solutions Center at
The Brother machine cannot print or scan over the network.
The Brother machine is not found on the network even after successful installation. (continued)
Question
Interface Solution