Brother MFC J6510DW - Manual (Page 22)

Configuring your machine for a wireless network
17
3
g
The machine will search for your network and display a list of available SSIDs.
Choose using a or b.
Press OK.
h
Enter the SSID name. (For information how to enter text, see the Quick Setup Guide.)
Press OK.
i Using a or b, choose Ad-hoc or Infrastructure when instructed.
Press OK.
Do one of the following:
If you chose Ad-hoc, go to step k.
If you chose Infrastructure, go to step j.
j Choose the Authentication method using a or b, and press OK.
Do one of the following:
If you chose Open System, go to step k.
If you chose Shared Key, go to step l.
If you chose WPA/WPA2-PSK, go to step m.
k
Choose the Encryption type None or WEP using a or b, and press OK.
Do one of the following:
If you chose None, go to step o.
If you chose WEP, go to step l.
l Enter the WEP key you wrote down in step a on page 16. Press OK. Go to step o. (For information
how to enter text, see the Quick Setup Guide.)
m Choose the Encryption type, TKIP or AES using a or b. Press OK. Go to step n.
n Enter the WPA key you wrote down in step a on page 16 and press OK. Go to step o. (For information
how to enter text, see the Quick Setup Guide.)
o To apply the settings, choose Yes. To cancel, choose No.
Do one of the following:
If you chose Yes, go to step p.
If you chose No, go back to step g.
p The machine starts to connect to the wireless device you have chosen.
q
A connection result message appears for 60 seconds on the LCD and a wireless LAN report will
automatically be printed. If the connection failed, check the error code on the printed report and refer to
Troubleshooting in the Quick Setup Guide.
(Windows
®
)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose
Initial Installation/Install MFL-Pro Suite from the installation CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
installation CD-ROM.