Brother MFC J6510DW User Manual
Page 23
Configuring your machine for a wireless network
18
3
For Touchscreen models
3
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
1
TKIP is supported for WPA-PSK only.
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press MENU.
c
Press Network.
d
Press WLAN.
e
Press Setup Wizard.
f
When Switch Network interface to wireless? is displayed, press Yes to accept.
This will start the wireless setup wizard.
To cancel, press Stop/Exit.
g
The machine will search for your network and display a list of available SSIDs. Press a or b to display
SSID (Network Name):
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
Open system
WEP
NONE
—
Shared key
WEP
WPA/WPA2-PSK
AES
TKIP
Ad-hoc
Open system
WEP
NONE
—
For example:
SSID (Network Name):
HELLO
Communication Mode
Authentication method
Encryption mode
Network key
Infrastructure
WPA2-PSK
AES
12345678