Brother MFC J6510DW - Manual (Page 19)

Configuring your machine for a wireless network
14
3
 If there is an Ethernet Hub or Router in the same network as the WLAN access point (A) of your machine,
you can temporarily connect the Hub or Router to the machine using a network cable (B). You can then
remotely configure the machine from a computer on the network.
Configuration using the PIN Method of Wi-Fi Protected Setup
(Infrastructure mode only)
3
If your WLAN access point/router (A) supports Wi-Fi Protected Setup, you can also configure using the
PIN Method of Wi-Fi Protected Setup.
 Connection when the WLAN access point/router (A) doubles as a Registrar
1
.
 Connection when another device (C), such as a computer is used as a Registrar
1
.
1 The Registrar is a device that manages the wireless LAN.
B
A
A
A
C