Brother PT-H500 - Manual (Page 6)

1
2
3
4
5
6
7
8
5

E
D
IT
IN
G A L
ABE
L
Entering Symbols
 Deleting all text at once
Use the Clear key to delete all text at once.
Press the Clear key.
The Clear options are displayed.
Using the or key, select "Text Only" to delete all text while retaining the current
format settings, or select "Text&Format" to delete all text and format settings.
Press the OK or Enter key.
All text is deleted. All format settings are also deleted if
"Text&Format" was selected.
In addition to the symbols available on the keyboard, there are various symbols (including
international and extended ASCII characters) available with the symbol function.
To enter a symbol, use the Symbol function (see below).
Alternatively, press the Shift key and then press a key on the keyboard to enter the symbol
printed on the selected key's upper-right corner.
Entering Symbols Using the Symbol Function
Press the Symbol key.
A list of symbol categories and symbols in that category is displayed.
Select a symbol category (Punctuation, Mathematics, etc.) using the or key and
then press the OK or Enter key.
Select a symbol using the , , or key and then press the OK or Enter key.
The selected symbol is inserted into the line of text.
1
2
Press the Esc key to return to the text entry screen, without erasing (or clearing)
text or format.
3
Entering Symbols
1
The last symbol entered is selected in the displayed list.
2
3
When selecting a symbol:
• Press the Shift key and Symbol key to return to the previous page.
• Press the Symbol key to go to the next page.