Brother PT-H500 - Manual (Page 35)

LABEL PRINTING
34 Adjusting the Label Length
You can adjust the length of the printed label in a range of -3 to +3.
Press the Adjustment key.
Select "Label Length" using the or key and set the
value using the or key.
Press the OK or Enter key to apply the setting.
Special
tape
• Select this setting when using special tape.
• When using Fabric Iron-On Tapes, select "No
Cut" for Cut Options before printing. After
printing, remove the tape cassette from the
P-touch labeler and use scissors to cut the
tape.
• When multiple copies
are printed one time:
• When a label is printed
two times:
1. 1st print
2. 2nd print
Setting Description Example
ABC ABC ABC
0.96”
(24.5mm)
0.16”
(4mm)
0.16”
(4mm)
ABC ABC
0.96”
(24.5mm)
1.04”
(26.5mm)
1 2
Adjusting the Label Length
1
2
3
• Press the Esc key to return to the previous step.
• Press the Space key to set the value to the default setting.
• One level is equal to approximately 1% of the total label length.