Brother DCP-J140W - Manual (Page 93)

Firewall settings (For Network users)
86
4
3 In External Port number for this service: Enter “54925”.
4 In Internal Port number for this service: Enter “54925”.
5 Make sure UDP is selected.
Then, click OK.
e If you still have trouble with your network connection, click Add.
f Add port 137 for network scanning by entering the information below:
1 In Description of service: Enter any description, for example “Brother Network Print”.
2 In Name or IP address (for example 192.168.0.12) of the computer hosting this service on
your network: Enter “Localhost”.
3 In External Port number for this service: Enter “137”.
4 In Internal Port number for this service: Enter “137”.
5 Make sure UDP is selected.
Then, click OK.
g
Make sure that the new setting is added and is checked, and then click OK.
Windows Vista
®
users
4
a Click the button, Control Panel, Network and Internet, Windows Firewall and click
Change settings.
1
2
3
4
5