Brother DCP-J140W - Manual (Page 82)

ControlCenter4
75
3
c Click (E-mail).
d Your default E-mail application will open and the image will be attached to a new, blank E-mail.
Saving the scanned image
3
The (File) button lets you scan an image to a folder on your hard drive in one of the file types shown in
the file type list.
a
Select the Scan tab.
b If you want to change the scan settings, right-click (File) and then change the settings. If you want
to preview and configure the scanned image, check PreScan. Click OK.
c
Click (File).
d
The image will be saved in the folder you have chosen.
How to change the default settings of each button
3
You can change the default settings of the (Image), (OCR), (E-mail) and (File) button.
a Right-click the button that you want to configure and click Button settings. The settings dialog will
appear.
b Choose the settings for File Type, PreScan, Resolution, Scan Type, Document Size, Brightness,
Contrast and Continuous Scanning as needed.
c Click OK. The new settings will be used as the default settings.
Note
To preview and configure the scanned image, check PreScan in the settings dialog.