Brother MFC-3360C - Manual (Page 39)

Scanning
33
2
f
If you need to access advanced settings, click Adjust the quality of the scanned picture (3). You can
choose Brightness, Contrast, Resolution and Picture Type from Advanced Properties. Click OK
after you choose a setting.
g Click the Scan button in the Scan dialog box.
The machine starts scanning the document.
This time only the chosen area of the document appears in the PaperPort
® SE window (or your
application window).
Brother Scanner Utility
2
The Brother Scanner Utility is used to configure the WIA scanner driver for resolutions greater than 1200 dpi
and for changing the paper size. If you want to set Legal size as the default size, use this utility to change the
setting. You must restart your PC for the new settings to take effect.
„ Running the utility
You can run the utility by choosing Scanner Utility located in Start/All Programs/Brother/MFC-XXXX
menu (where XXXX is your model name)/Scanner Settings.
Note
If you scan the document at a resolution of greater than 1200 dpi, the file size may dramatically increase.
Make sure that you have enough memory and hard disk space for the size of the file you are trying to scan.
If you do not have enough memory or hard disk space then your PC may freeze as the document is
scanned and you could lose your file.