Brother MFC-3360C - Manual (Page 130)

ControlCenter2
124
10
ControlCenter2 gives you the ability to configure the hardware Scan key on your machine and the
ControlCenter2 Software button for each scan feature. To configure the hardware Scan key on your machine
choose the Device Button tab in the configuration menu for each of the SCAN buttons. To configure the
Software button in ControlCenter2 choose the Software Button tab in the configuration menu for each of the
SCAN buttons.
CUSTOM SCAN
10
You can configure the button name and settings for each of these buttons to meet your specific needs by
clicking a button while holding down the Ctrl key and following the configuration menus.
COPY / PC-FAX
10
COPY - Lets you use your Macintosh
®
and any printer driver for enhanced copy operations. You can scan a
page on the machine and print the copies using any of the features of the machine’s printer driver, or you can
direct the copy output to any standard printer driver installed on your Macintosh
® including network printers.
PC-FAX - Lets you scan a page or document and automatically send the image as a fax from the Macintosh
®
.
(Not available for DCP models.)
You can configure your preferred settings on up to four buttons.
DEVICE SETTINGS
10
You can configure the machine settings or check ink levels.
„ Remote Setup
Lets you open the Remote Setup Program. (Remote Setup (Not available for DCP models and MFC-
240C) on page 143.)
„ Quick-Dial
Lets you open the Set Quick-Dial window of the Remote Setup. (Remote Setup (Not available for DCP
models and MFC-240C) on page 143.)
„ Ink Level
Lets you open the Brother Status Monitor, which displays the ink level for each cartridge.