Scan to image, Scan to ocr, Scan to image scan to ocr – Brother MFC-3360C User Manual
Page 147: 11 scan to image
Network Scanning (For models with built-in network support)
141
11
Scan to Image
11
When you choose Scan to Image, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the default graphics application on the designated
Macintosh
®
. You can change the Scan configuration. (See Image (example: Apple
a
Load your document.
b
Press the
(Scan) key.
c
Press a or b to choose Scan to Image.
Press OK.
d
Press a or b to choose the destination Macintosh
®
you want to send to.
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Scan to OCR
11
When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
®
you
designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
®
(Presto!
®
PageManager
®
) and convert your document into text for viewing and editing from a word
processing application on the designated Macintosh
®
. You can change the Scan configuration. (See OCR
(word processing application) on page 127.)
a
Load your document.
b
Press the
(Scan) key.
c
Press a or b to choose Scan to OCR.
Press OK.
d
Press a or b to choose the destination Macintosh
®
you want to send to.
Press OK.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination
Macintosh
®
on the control panel.
Press OK.
e
Press Black Start or Color Start.
The machine starts the scanning process.
Note
Presto!
®
PageManager
®
must be installed on your Macintosh
®
.