Brother MFC-8510DN - Manual (Page 32)

Chapter 2
20
Paper capacity of the paper trays
2
1 Folio size is 8.5 in. × 13 in.
2 The optional lower tray is available for MFC-8710DW, MFC-8810DW and MFC-8910DW.
Recommended paper specifications
2
The following paper specifications are suitable for this machine.
 Use paper made for plain paper copying.
 Use paper that is 20 to 24 lb (75 to 90 g/m
2
).
 Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
Paper size Paper types No. of sheets
Standard Paper Tray
(Tray 1) Letter, A4, Legal, B5,
Executive, A5,
A5 (Long Edge), A6, B6,
Folio
1
Plain paper, Thin paper,
Recycled paper up to 250
20 lb (80 g/m
2
)
Multi-purpose Tray
(MP Tray) Width: 3 to 8.5 in.
(76.2 to 215.9 mm)
Length: 5 to 14 in.
(127 to 355.6 mm)
Plain paper, Thin paper,
Thick paper,
Thicker paper,
Bond paper,
Recycled paper,
Envelopes, Labels 50 sheets
20 lb (80 g/m
2
)
3 Envelopes
Optional Lower Tray
(Tray 2)
2
Letter, A4, Legal, B5,
Executive, A5, B6,
Folio
1
Plain paper, Thin paper,
Recycled paper up to 500
20 lb (80 g/m
2
)
Basis weight 20-24 lb (75-90 g/m
2
)
Thickness 80-110 μm
Roughness Higher than 20 sec.
Stiffness 90-150 cm
3
/100
Grain direction Long grain
Volume resistivity 10e
9
-10e
11
ohm
Surface resistivity 10e
9
-10e
12
ohm-cm
Filler CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%