Brother MFC-8510DN - Manual (Page 160)

148
7.Network
(MFC-8710DW)
(Continued)
1.Wired LAN
(Continued)
3.Wired Status
— —
Active 100B-FD
Active 100B-HD
Active 10B-FD
Active 10B-HD
Inactive
Wired OFF
You can see the
current wired
status. See .
4.MAC Address
— — — Shows the MAC
address of the
machine.
5.Set to Default
— —
1.Reset
2.Exit
Restore the wired
network setting to
factory default.
6.Wired Enable
— —
On
*
Off
Enable or Disable
the Wired LAN
manually.
2.WLAN 1.TCP/IP 1.Boot Method
—
Auto
*
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method that
best suits your
needs.
(IP Boot
Tries
)
—
00003
*
[00000-32767]
Specifies the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method
is
set to any setting
except Static.
2.IP Address
— [000-255].
[000-255].
[000-255].
[000-255] Enter the IP
address.
3.Subnet Mask
— [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet
mask.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.