Brother MFC-8510DN - Manual (Page 152)

140
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
7.Network
(MFC-8510DN)
1.TCP/IP 1.Boot Method
— —
Auto
*
Static
RARP
BOOTP
DHCP
Chooses the
BOOT method that
best suits your
needs. See .
(IP Boot
Tries
)
— —
00003
*
[00000-32767]
Specifies the
number of
attempts the
machine will try to
obtain an IP
address when the
Boot Method
is
set to any setting
except Static.
2.IP Address
— — [000-255].
[000-255].
[000-255].
[000-255] Enter the IP
address.
3.Subnet Mask
— — [000-255].
[000-255].
[000-255].
[000-255] Enter the Subnet
mask.
4.Gateway
— — [000-255].
[000-255].
[000-255].
[000-255] Enter the Gateway
address.
5.Node Name
— —
BRNXXXXXXXXXXXX
Enter the Node
name.
(Up to 32
characters)
6.WINS Config
— —
Auto
*
Static
Chooses the WINS
configuration
mode.
See Network User's Guide.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.