Brother MFC-8510DN - Manual (Page 164)

152
7.Network
(MFC-8710DW)
(Continued)
3.Wi-Fi Direct
(Continued)
6.Status Info. 1.Status
—
G/O Active(**)
Client Active
Not Connected
Off
Wired LAN Active
**
= the number
of devices
You can see the
current Wi-Fi
Direct™ network
status. See .
2.Signal
—
Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your
machine acts as
Group Owner, the
LCD always shows
Strong
.
7.I/F Enable
— —
On
Off
*
Enable or Disable
the Wi-Fi Direct™
connection.
(4.E-mail/
IFAX
)
1.Mail Address
— — — Enter the E-mail
address. (Up to 60
characters) See .
2.Setup Server 1.SMTP 1.SMTP Server Name
(Up to 64
characters)
IP Address
[000-255].
[000-255].
[000-255].
[000-255]
Enter the SMTP
server address.
2.SMTP Port 25
*
[00001-65535]
Enter the SMTP
port number.
3.Auth. for SMTP None
*
SMTP-AUTH
POP bef.SMTP
Selects the
Security method
for E-mail
notification.
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions Page
See Network User's Guide.
Please go to the Brother Solutions Center to download the manual at http://solutions.brother.com/.
 The factory settings are shown in Bold with an asterisk.
 LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.
 To use these functions, please download the necessary software from our web site, the Brother
Solutions Center at http://solutions.brother.com/.
 Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.