Brother MFC-8510DN - Manual (Page 31)

Loading paper
19
2
Acceptable paper and
other print media
2
Print quality may vary according to the type of
paper you are using.
You can use the following types of print
media: plain paper, thin paper, thick paper,
thicker paper, bond paper, recycled paper,
labels or envelopes.
For best results, follow the instructions below:
 DO NOT put different types of paper in the
paper tray at the same time because it
may cause paper jams or misfeeds.
 For proper printing, you must choose the
same paper size from your software
application as the paper in the tray.
 Avoid touching the printed surface of the
paper immediately after printing.
 Before you buy a lot of paper, test a small
quantity to make sure the paper is
suitable.
 Use labels that are designed for use in
laser machines.
Recommended paper and
print media
2
Type and size of paper
2
The machine feeds paper from the installed
standard paper tray, multi-purpose tray or
optional lower tray.
The names for the paper trays in the
printer driver and this Guide are as
follows:
2
1 The optional lower tray is available for
MFC-8710DW, MFC-8810DW and MFC-8910DW.
Paper Type Item
Plain Paper Xerox 4200DP 20 lb
Hammermill Laser Print
(24 lb=90 g/m
2
)
Recycled Paper No specific brand
recommended
Labels Avery laser labels white
#5160
Envelopes No specific brand
recommended
Tray and optional unit Name
Standard Paper Tray Tray 1
Multi-purpose Tray MP Tray
Optional Lower Tray
Tray 2
1