Brother TD-4100N - Manual (Page 61)

ESC iXm2 Select character code set
[ASCII] ESC i X m 2 n1 n2 n3
[Decimal] 27 105 88 109 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 6D 32 nh1 nh2 nh3
[Parameters] nh1:01h (Fixed)
nh2:00h (Fixed)
nh3:00h 01h 02h
[Description]
・ Selects the character code set. (For details on the character code sets, refer to the
character code tables.)
nh3=00h: Brother standard
nh3=01h: Windows1250 (Eastern Europe)
nh3=02h: Windows1252 (Western Europe)
・ Invalid when nh3 is set to a value other than 00h through 02h
・ This command is a static command.
[Example]
・ To set the character code set to the Brother standard:
ESC i X m 2 01h 00h 00h
(1Bh 69h 58h 6Dh 32h 01h 00h 00h)
41