Brother TD-4100N - Manual (Page 43)

^FC FNC1 replacement setting
[ASCII] ^ F C n
[Decimal] 94 70 67 nd
[Hexadecimal] 5E 46 43 nh
[Parameters] 0≤n≤1
[Description]
・ This command selects whether or not GS codes, which are included in bar code
protocols such as GS1-128 (UCC/EAN-128), are replaced with FNC1 codes.
n: FNC1 replacement setting
(ON: 1; OFF: 0 (default))
・ This command is a dynamic command.
[Remarks]
・ Invalid if n is a value other than 1 or 0
[Example]
・ To disable FNC1 replacement:
Since FNC1 replacement will be disabled, n=0. Therefore, the command will be as
follows.
^ F C 0
(5Eh 46h 43h 30h)
23