Brother TD-4100N - Manual (Page 59)

ESC iXc2 Specify machine settings (cut options)
[ASCII] ESC i X c 2 n1 n2 n3
[Decimal] 27 105 88 99 50 nd1 nd2 nd3
[Hexadecimal] 1B 69 58 63 32 nh1 nh2 nh3
[Parameters] nh1:01h (Fixed)
nh2:00h (Fixed)
nh3:00h 01h 08h 09h
[Description]
・ Specifies the various cut options.
nh3=00h:
No cutting
nh3=01h: Automatically cuts
nh3=08h: Cut at end turned on
nh3=09h: Auto cutting turned on, and cut at end turned on
・ This command is a static command.
[Example]
・ To specify auto cutting:
ESC i X c 2 01h 00h 01h
(1Bh 69h 58h 63h 32h 01h 00h 01h)
39