Brother TD-4100N - Manual (Page 46)

^SR Status request
[ASCII] ^ S R
[Decimal] 94 83 82
[Hexadecimal] 5E 53 52
[Parameters] None
[Description]
・ The printer status is returned.
The printer status consists of 32 bytes.
Number Offset Size Name Value/Reference
1 0 1 Print head mark Fixed at “80 Hex”
2 1 1 Size Fixed at “20 Hex”
3 2 1 “Brother” code Fixed at “’B’ Char (42 Hex)”
4 3 1 Series code Fixed at “’5’ Char (35 Hex)”
5 4 1 Model code Fixed at
TD-4000:“’1’ Char (31 Hex)”
TD-4100N:“’2’ Char (32 Hex)”
6 5 1 Country code Fixed at “’0’ Char (30 Hex)”
7 6 1 Machine information Fixed at “00 Hex”
8 7 1 Reserved Fixed at “00 Hex”
9 8 1 Error information 1 Refer to the following table.
10 9 1 Error information 2 Refer to the following table.
11 10 1 Media width
12 11 1 Media type Refer to the following table.
13 12 1 Number of colors Fixed at “00 Hex”
14 13 1 Media length (upper order bytes)
15 14 1 Media sensor value
16 15 1 Mode Fixed at “00 Hex”
17 16 1 Density Fixed at “00 Hex”
18 17 1 Media length (lower order bytes)
19 18 1 Status type Refer to the following table.
20 19 1 Phase type Fixed at “00 Hex”
21 20 1 Higher order bytes of phase
number Fixed at “00 Hex”
22 21 1 Lower order bytes of phase
number Fixed at “00 Hex”
23 22 1 Notification number Not used
24 23 1 Number of bytes in the
expanded area Fixed at “00 Hex”
25 24 8 Reserved Fixed at “00 Hex”
26