Brother TD-4100N - Manual (Page 13)

Specifying the line spacing setting in P-touch Editor
・ Character styles specified in P-touch Editor are all made the same style within an object.
・ If the “Long Text” setting is selected below “Text Layout” in P-touch Editor, the vertical
alignment setting is normally set for top alignment.
・ If "Long Text” is selected below “Text Layout” in P-touch Editor, or if continuous length
label is used, the print length is increased to fit the text.
・ The “Fixed Frame Size (Wrap)” setting specified below “Text Layout” in P-touch Editor is
changed to “Shrink to Fit”.
(“Fixed Frame Size (Wrap)” is a mode that was added for inserting long text. Since it is
possible that the text size may become extremely small if the wrapping feature is no
longer applied, we recommend that “Fixed Frame Size” be selected when die-cut labels
are specified in P-touch Editor or a fixed length is specified or that “Automatic Length” be
selected when an automatic media length is specified.)
1. Shrink to Fit: The text object size is fixed, and the text size is changed depending on the
text length.
2. Clip Text: The text object size is fixed, and the text size is fixed. If the text is too long, the
text is not printed.
3. Long Text: The text object width is fixed, and the text size is fixed. If the text is too long,
the text object height is increased.
4. Automatic Length: The text object height is fixed, and the text size is fixed. If the text is
too long, the text object width is increased.
5. Free Size: The text size is fixed. If the text is too long, the text object width is increased.
If a new line is started, the text height is increased.
13