Brother TD-4100N - Manual (Page 19)

Specifying the object name
・ When print data is fed, the command mode should be the P-touch Template mode.
・ This is not compatible with split labels.
・ After printing from P-touch Editor, the command mode changes to raster mode. In order
to print a template, select the P-touch Template mode in the Printer Settings tool or, if the
previous mode in the Printer Settings tool was the P-touch Template mode, turn the
machine off, then on again to enter P-touch Template mode.
If printing does not begin (main most frequent causes)
1) Incorrect communication settings
2) The command mode is not in the P-touch Template mode.
3) The conditions for the print start trigger are not met.
The following three types of print start triggers exists, but this selection is incorrect.
① When the specified text string is received
② When all objects are filled
③ When the specified number of characters is received
If the settings described above are incorrect, use the machine setting tool to specify the
settings.
19