Brother TD-4100N - Manual (Page 76)

ESC iXy1 Retrieve machine settings (cut options–specify cutting after a number of
labels)
[ASCII] ESC i X y 1 n1 n2
[Decimal] 27 105 88 121 49 nd1 nd2
[Hexadecimal] 1B 69 58 79 31 nh1 nh2
[Parameters] nh1:00h (Fixed)
nh2:00h (Fixed)
[Description]
・ Retrieves the setting for the cut after a fixed number of labels.
・ 3-byte data is returned from the machine.
[1]:01h (Fixed)
[2]:00h (Fixed)
[3]: Setting
・ The retrieved value is a value specified by a static command.
[Example]
・ When cutting is specified for every five labels:
If ESC i X y 1 00h 00h (1Bh 69h 58h 79h 31h 00h 00h) is sent to the machine, the
following is returned from the machine.
01h 00h 05h
56