Brother TD-4100N - Manual (Page 55)

ESC iXa2 Specify Non-Printed character text strings
[ASCII] ESC i X a 2 n1 n2 n3 data
[Decimal] 27 105 88 97 50 nd1 nd2 nd3 datad
[Hexadecimal] 1B 69 58 61 32 nh1 nh2 nh3 datah
[Parameters] 01h≤nh1≤15h
nh2:00h (Fixed)
nh3:01h (Fixed)
00h≤datah≤FFh
[Description]
・ Specifies the Non-Printed character text string.
nh1+(nh2*256):
Length of the text string (0 to 20) + 1
data: Text string (The maximum number of characters that can be set is 20
characters (bytes).)
・ This command is a static command.
[Remarks]
・ Invalid when an attempt is made to specify more than 20 characters
[Example]
・ To specify the Non-Printed character text string as “ABCD”:
Since the text string contains four characters, nh1=05h and nh2=00h, and then the
command will be as follows.
ESC i X a 2 05h 00h 01h A B C D
(1Bh 69h 58h 61h 32h 05h 00h 01h 41h 42h 43h 44h)
35