Brother TD-4100N - Manual (Page 42)

^QV Specify QR code version
[ASCII] ^ Q V n1 n2
[Decimal] 94 81 86 nd1 nd2
[Hexadecimal] 5E 51 56 nh1 nh2
[Parameters] 0≤n1≤9
0≤n2≤9
[Description]
・ Specifies the QR code version.
(n1*10)＋n2: Version number (between 0 and 40)
・ The default QR code version is 0.
・ This command becomes invalid when a value other than those that can be set (between
0 and 40) has been specified.
・ This command is a dynamic command.
[Example]
・ To change the version to 10: Since n1=1 and n2=0, the command will be as follows.
^ Q V 1 0 (5Eh 51h 56h 31h 30h)
22