Brother MW-260 - Manual (Page 47)

47
[Bar code data]: maximum bar code data size:
It is 1,850 characters of alphanumeric, 2,710 characters of numeric or 1,108 bytes of binary to input the
data for bar code. The characters of 2 byte-code are handled as a binary data.
Note: Above “maximum characters” is applied when the lowest level of error correction is set. It may be
decreased by higher levels of error correction and lower leles of compression.
Data end sign.
For 2D bar codes, 3 backslashes “\\\” should be inserted at the end of the data.