Brother MW-260 - Manual (Page 25)

25
・ This mode is cancelled using CR, ESC $, ESC \, ESC ( V, ESC ( v.
ESC SO Specify auto-cancelling enlarged characters
[ASCII] ESC SO
[Decimal] 27 14
[Hexadecimal] 1B 0E
[Parameters] None
[Description]
・ Same as SO
SI Specify half-width characters
[ASCII] SI
[Decimal] 15
[Hexadecimal] 0F
[Parameters] None
[Description]
・ Prints the following data in half-width characters.
ESC SI Specify half-width characters
[ASCII] ESC SI
[Decimal] 27 15
[Hexadecimal] 1B 0F
[Parameters] None
[Description]
・ Same as SI
DC2 Cancel half-width characters
[ASCII] DC2
[Decimal] 18
[Hexadecimal] 12
[Parameters] None
[Description]
・ Cancels the half-width characters specified using SI.