Brother MW-260 - Manual (Page 33)

33
2-5) Vertical movement commands
LF Line feed
[ASCII] LF
[Decimal] 10
[Hexadecimal] 0A
[Parameters] None
[Description]
・ The print position is at the beginning of the next line.
・ A “Carriage return” command after an LF command will be ignored.
FF Page feed
[ASCII] FF
[Decimal] 12
[Hexadecimal] 0C
[Parameters] None
[Description]
・ Begins printing.
・ After printing based on commands and characters previously entered, all text is cleared.
(Same as ESC @.)