Brother MW-260 - Manual (Page 37)

37
2-6) Paper formatting
ESC ( c Specify page format
[ASCII] ESC ( c nL nH tL tH bL bH
[Decimal] 27 40 99 nL nH tL tH bL bH
[Hexadecimal] 1B 28 63 nL nH tL tH bL bH
[Parameters] nL=4, nH=0
(tL+tH*256)<(bL+bH*256)
Top margin < Bottom margin
[Description]
・ Specifies settings for the top and bottom margins.
・ This printer is designed specifically for A7-size or A6-size paper. As for A7-size, the physical
printable area is 1,180 dots (height) * 816 dots (width) with the portrait orientation, or 816 dots
(height) * 1,180 dots (width) with the landscape orientation. As for A6-size, the physical
printable area is 1,660 dots (height) * 1,152 dots (width) with the portrait orientation, or 1,152
dots (height) * 1,660 dots (width) with the landscape orientation.
The top margin and bottom margin are specified in units of 1/300 inch (1 dot), based on the top edge of
the physical printable area.
(The left margin and right margin are based on the left side of the physical printable area.)
Top margin = tL + tH * 256
Bottom margin = bL + bH * 256
2-7) Printer control commands
ESC @ Initialize
[ASCII] ESC @
[Decimal] 27 64
[Hexadecimal] 1B 40
[Parameters] None
[Description]
・ Resets all commands to their default settings.
・ Clears the data from the print buffer.