Brother MW-260 - Manual (Page 21)

21
[Description]
・ Selects the font.
n=0 Brougham (better for fixed-width)
n=1 Letter Gothic Bold (better for fixed-width)
n=2 Brussels (better for proportional)
n=3 Helsinki (better for proportional)
n=4 San Diego (better for proportional)
・ The default setting is n=0 Brougham (better for fixed-width).
** These parameters are supported by MW-145BT and MW-260.
[Parameters] 00h ≤ n ≤ 04h (bitmap fonts)
[Parameters] 09h ≤ n ≤ 0Bh (outline fonts)
[Description]
・ Selects the font.
n=0 Brougham (better for fixed-width)
n=1 Letter Gothic Bold (better for fixed-width)
n=2 Brussels (better for proportional)
n=3 Helsinki (better for proportional)
n=4 San Diego (better for proportional)
n=9 Letter Gothic (better for fixed-width)
n=10 Brussels (better for proportional)
n=11 Helsinki (better for proportional)
・ The default setting is n=0 Brougham (better for fixed-width).
ESC t Select character code table
[ASCII] ESC t n
[Decimal] 27 116 n
[Hexadecimal] 1B 74 n
[Parameters] n=0, 1, 2
[Description]
・ From the two built-in character code tables, selects the character code table to be used.
・ n=0: Code table for regular characters
・ n=1: Code table for Eastern European characters
・ n=2: Code table for Western European characters
・ n=3: (Spare)
・
The default setting is n=0.