E-m-hc2 probes-v1_26 – ROTRONIC HC2 User Manual

Page 8

E-M-HC2 Probes-V1_26

Rotronic AG
Bassersdorf, Switzerland

Document code

Unit

HygroClip 2 (HC2) Humidity Temperature
Probes: User Guide

Instruction Manual

Document Type

Page 8 of 31

Document title

Measurement of paper – cardboard stacks and rolls

Handheld probe for use with indicators and data loggers

HC2-HS28

Humidity measuring range: 0…100 %RH
Temperature limits at sensor -40…85 °C (-40…185 °F)
Blade: thickness: 4 mm (0.16”), width: 22 mm (0.87”), length: 280 mm (11.0”)
Probe cable length: 2 m (6.5 ft)
Weight: approx. 240 g (8.5 oz)
Handgrip: POM, black - blade: aluminum / elox

HC2-HS42

Same as HC2-HS28 but with 420 mm blade length (16.5”)
Weight: approx. 300 g (10.6 oz)

Measurement of product samples (liquids, pastes, powders, granules or chunks)

Handheld probe for use with indicators and data loggers

HC2-AW

Humidity measuring range: 0…100 %RH
Temperature limits at sensor -40…85 °C (-40…185 °F)
Barrel: aluminum (top) , stainless steel (bottom)
Probe cable length: 0.95 m (37.5”)
Weight: approx. 541 g (1 lb 3.1 oz)

Note:
When using the HC2-AW probe, check that the red LED on top of the probe is lit. This indicates that the probe
is being powered. If necessary, power the probe by pressing once on the red button located on top of the probe.
When the red LED is not lit, the probe is not powered and the instrument is not receiving a signal from the probe.

Power ON/OFF (push button)

Power Indicator (red LED)

Use together with WP14 or
WP-40 sample cup holder

Prior to use, verify the integrity
and cleanliness of the sealing
O-ring located under the probe