ROTRONIC HC2 - Manual (Page 30)

E-M-HC2 Probes-V1_26
Rotronic AG
Bassersdorf, Switzerland
Document code Unit
HygroClip 2 (HC2) Humidity Temperature
Probes: User Guide
Instruction Manual
Document Type
Page 30 of 31
Document title
© 2009-2013; Rotronic AG E-M-HC2 Probes-V1_26
Document File Name Contents
E-T-AC3000-DF-V1 AirChip 3000 Description and Main Functions
E-M-HW4v3-DIR List of the HW4 manuals
E-M-HW4v3-Main
HW4 software version 3: General instructions and functions common to all
devices
E-M-HW4v3-F2-001
HW4 software version 3: HC2 probe series
Device configuration and AirChip 3000 functions
E-M-HW4v3-A2-001 HW4 software version 3: Probe Adjustment function AirChip 3000 devices
E-M-HW4v3-DR-001 HW4 software version 3: Data Recording Function AirChip 3000 Devices
E-M-AC3000-CP AirChip 3000 Communication Protocol
E-M-TCPIP-Conf
Configuration procedures for ROTRONIC devices
with Ethernet (TCP/IP) interface
E-M-CalBasics
Temperature and humidity adjustment basics
Instructions for using the ROTRONIC humidity standards
E-T-HumiDefs Humidity Definitions
Note: All document file names have an extension corresponding to the document release number (example of
a first release: E-M-HW4v2-Main_10). This extension is not shown in the above table.
13 Document releases
Doc. Release Date Notes
_20 Apr. 11, 2009 Original release
_21 Aug. 19, 2009
Added probe model HC2-AW
Corrected the specification of some of the probe materials
_22 Jun. 18, 2010 Updated document to HW4 software v.3
_23 May 20, 2011 Modified dimensional specifications of the HC2-C04 probe
_24 Jan. 6, 2012 Changed the factory default for data recording to “disabled”
_25 May 30, 2013
Page 10: reduced maximum pressure to 100 bar / 1450 PSI for
the HC2-IE102/105 and HC2-IE302/305
_26 Nov. 2013
Changes for HygroClip2 with firmware v3.0
Power supply range changed to 3.3…5 VDC
HC2-IE maximum pressure range changed to 100 bar.
Added HC2-SM
Added HC2-IMxxx-M
Added HC2-IExxx-M