E-m-hc2 probes-v1_26 – ROTRONIC HC2 User Manual

Page 6

E-M-HC2 Probes-V1_26

Rotronic AG
Bassersdorf, Switzerland

Document code

Unit

HygroClip 2 (HC2) Humidity Temperature
Probes: User Guide

Instruction Manual

Document Type

Page 6 of 31

Document title

Measurement in tight spaces

For use with indicators, data loggers and transmitters

HC2-C04

Humidity measuring range: 0…100 %RH
Temperature limits -40…85 °C (-40…185 °F)
Diameter: 4 mm (0.16”), cable length (electronics – probe tip: about 0.59 m (1.9 ft)
Probe electronics housing: polycarbonate, black
Weight: approx. 150 g (5.3 oz)

HC2-C05

Same as HC2-C05 but with 5 mm diameter (0.2”)
Can be equipped with Teflon dust filter SP-T05
Weight: approx. 160 g (5.6 oz)

Note: accuracy of the HC2-C04 and HC2-C05 probe models is affected by the temperature of the cable
separating the sensors from the electronics (see §10.3).

Spot check measurements in air ducts, chambers and ovens

Handheld probe for use with indicators and data loggers

HC2-HK25

Humidity measuring range: 0…100 %RH
Temperature limits at sensor -100…150 °C (-148…302 °F)
Barrel: diameter: 15 mm (0.6”), length: 250 mm (9.8”)
Probe cable length: 2 m (6.5 ft)
Handgrip: POM, black -, barrel: PEEK, black
Filter base (NSP-ME) with wire mesh filter cartridge (SP-M15)
Weight: approx. 210 g (7.4 oz)

HC2-HK40

Humidity measuring range: 0…100 %RH
Temperature limits at sensor -100…200 °C (-148…392 °F)
Same as HC2-HK25 but with barrel 400 mm barrel length (15.7”)
Weight: approx. 240 g (8.5 oz)