NORD Drivesystems BU0540 - Manual (Page 48)

SK 500E – Brief instructions for frequency inverters
48 BU 0540 GB-1013
Parameter
No. [Array]
Name
Factory
setting
Super-
visor
Setting after commissioning
P 1 P 2 P 3 P 4
P613 [-57] Position 57 [rev] 0 S
P613 [-58] Position 58 [rev] 0 S
P613 [-59] Position 59 [rev] 0 S
P613 [-60] Position 60 [rev] 0 S
P613 [-61] Position 61 [rev] 0 S
P613 [-62] Position 62 [rev] 0 S
P613 [-63] Position 63 [rev] 0 S
P615 Maximum position [rev] 0 S
P616 Minimum position [rev] 0 S
P625 Hysteresis output [rev] 1 S
P626 Comparative Position Output [rev] 0 S
P630 Position slip error [rev] 0 S
P631 Abs/Inc slip error [rev] 0 S
P640 Unit of pos. value 0 S
Parameter
No. [Array]
Name Actual status and displayed values
INFORMATION, read only
P700 [-01] Actual error
P700 [-02] Actual warning
P700 [-03] Reason for switch-on block
P701 Last error 1...5
P702 Freq. previous fault 1...5
P703 Current, previous fault 1...5
P704 Voltage, previous fault 1...5
P705 UZW, previous fault 1...5
P706 P-set last error 1...5
P707 Software version (/Revision) 1…3
P708 Digital input status (bin/hex)
P709 Voltage, analog input 1 [V]
P710 Analog output voltage [V]
P711 Relay status [hex]
P712 Voltage, analog input 2 [V]
P714 Operating period [h]
P715 Enable period [h]
P716 Actual frequency [Hz]
P717 Actual speed [rpm]
P718 Actual Setpoint frequency 1..3 [Hz]
P719 Actual current [A]