Badger Meter Fluid Management System - Manual (Page 9)

Installation & Operation Manual
STANDALONE KEYPAD SCREEN TYPES
The remainder of this document shows only the actual display, not the entire keypad
Default Screens
The Default screens toggle between the System Version screen and the Enter PIN Number screen The System Version screen
displays for 2 seconds, then the Enter PIN Number screen displays for 3 seconds The cycle repeats until a PIN number is
entered
System Version
16aug2012 08:35
V3.00 2.4GHz
The first default screen is informational It shows the software version
number
Enter PIN Number
Enter Pin No.
- - - -
The second default screen is used by the supervisor to access the
management screens: Initialization, Configuration, Meter, Report
(External Printer), 190 (Internal Printer) and Radio There can be only
one supervisor account per keypad
The Personal Identification Number (PIN) is four digits To access
management screens, enter the supervisor PIN number The default is
0000 at initial power-up
Management Screens
The Management screens are available after the supervisor PIN number has been entered The Management screens are:
•
Initialization (INI)
• Configuration (CNF)
• Meter (MET)
• Report (REP) External Printer
• 190 Report Internal Printer (FT190 is the model number of the internal printer)
• Radio (RAD)
Select
INI CNF MET REP
To select a Management screen, press the Scroll key to move through
the menu options until the screen you want is highlighted, then press
Enter
Select
190 RAD ... ...
Page 9 August 2012